|
View
the specifications for this product in PDF format here.
(right click on link and "save as" to download the file).
|
STC-4110
Dual Mode Battery Analyzer
The STC 4110 Dual Mode Battery Analyzer is a
microprocessor controlled, host powered instrument designed to test
and evaluate the standby charged condition and dynamic capabilities
under load of any 6 or 12 volt, sealed, lead-acid battery with an
amp hour range of 4 to 100 A.H. It will also perform a calculation
of the remaining Amphour capacity.
For
the pre-load static test, the Analyzer automatically determines
the voltage of the battery. The Amphour rating is entered to set
the parameters prior to the load testing. A voltmeter function may
be used to check the charging circuit.
For
the dynamic load test, a microprocessor controlled load test sequence
is operator initiated with the battery disconnected from the charging
circuit. The load current is based on the entered AmpHour capacity.
The battery condition is evaluated during the load test and is displayed
on LED’s as: Good, marginal, bad
The
4110 will perform an additional test that determines the remaining
capacity of the battery. This result can be compared to the minimum
standby requirement to determine if the battery will meet the demands
of an extended power failure. A math calculation routine is available
in the 4110 to size batteries for various fire, UPS, and security
systems.
| STC-4110
Dual Mode Battery Analyzer |
$1995.00 |
|
|
    
|
